How to install a wall mural

Material needed

Preparing the surface

 

Remove any old wallpaper which you might have.
Clean the wall, remove any dust.
Fill any holes or cracks in the wall with patching plaster.
Two coats of latex paint which is usually inexpensive, will prepare the surface for installation.

Before applying the paste

Layout each panel next to it's matching panel. Match colors and patterns.
   

Preparing the paste

Most murals come with adhesives enclosed. You just have to mix them properly and slowly. Follow the instructions till you achieve the required texture for good adhesion.

Before placing the first panel

wall murals
Wall murals for children
Tile murals
Trompe l'oeil and Faux finishing
How to install a wall mural
Tips
More

First panel should be pasted with utmost care since it determines the appearance of the whole mural.
To determine the exact position of the first panel, use plumb-line, ruler and a pencil. It's better to start with the top left panel.

Applying the paste

Do not soak your mural with adhesive. If it becomes too wet, it will break.
Apply the paste first to the wall and then to the mural. Apply the paste uniformly covering the edges.

Installing the mural

The ideal temperature for hanging a mural is 18-20 degree C approximately.
Mural should be hanged in a draft free room.
Since you have already determined the position of first panel, paste the panel carefully.
Stroke the panel gently from center outwards to remove any air bubble.
Place the lower part of the panel according to the lines drawn.
Time period between installation of each panel should not be too long. If it's too long, panel designs will not line up properly.
Once the mural dries, it will contract. So overlap each panel 1/8 Th. of an inch.
Once the mural dries, do the necessary trimming by using a paper knife.

Remove any paste from the front of the mural using soft, slightly damp cloth.

Last step

Step backwards and admire your work.